Table of Contents
Advertisement
07
Installation Guide Switches
Installation
For safe and secure installation of your LANCOM device, please observe the
safety instructions and intended use.
Selecting a site
The switch can be mounted in a standard 19-inch equipment rack or on a flat
surface. Be sure to follow the guidelines below when choosing a location.
→ Position the switch near the devices you want to link and near a power
outlet.
→ Be able to maintain the temperature of the switch within the limits listed
in the Hardware Quick Reference Guide.
→ Have the switch accessible for installing, cabling, and maintaining the
devices.
→ Allow the status LEDs to be clearly visible
Make sure that one rack slot is left free above and below for air circulation
!
when installing the device in a rack.
Make sure the twisted-pair Ethernet cable is always routed away from power
!
lines, radios, transmitters or any other electrical interference.
Make sure that the switch is connected to a separate grounded power outlet
!
that provides 100 to 240 VAC, 50 to 60 Hz
Advertisement
Table of Contents
