Lancom XS-6128QF Installation Manual page 5

04 Installation Guide Switches
Safety instructions and intended
use
In order to avoid harming yourself, third parties or your equipment when
!
installing your LANCOM device, please observe the following safety
instructions. Operate the device only as described in the accompanying
documentation. Pay particular attention to all warnings and safety
instructions. Use only those third-party devices and components that are
recommended or approved by LANCOM Systems.
Before commissioning the device, be sure to study the Quick Reference
Guide supplied with the hardware. These can also be downloaded from the
LANCOM website (www.lancom-systems.com).
Any warranty and liability claims against LANCOM Systems are excluded
following any usage other than the intended use described below.
Environment
LANCOM devices should only be operated when the following environmental
requirements are met:
→ Ensure that you comply with the temperature and humidity ranges
specified in the Quick Reference Guide for the LANCOM device.
→ Do not expose the device to direct sunlight.
→ Ensure that there is adequate air circulation and do not obstruct the
ventilation slots.
→ Do not cover devices or stack them on top of one another
→ The device must be mounted so that it is freely accessible (for example,
it should be accessible without the use of technical aids such as
elevating platforms); a permanent installation (e.g. under plaster) is not
permitted.