Lancom XS-6128QF Installation Manual page 15

14 Installation Guide Switches
To start the Rollout Assistant, just enter the URL cloud.lancom.de/rollout into
a browser. The Rollout Assistant opens with this login screen:
You select the desired language and login to the LMC using your credentials.
On the next page, you select the project that new devices are added to.
Do this by tapping the green button and scanning the serial number. The
Rollout Assistant may request access to the camera on the device to do
this. You scan the serial number either on the underside of the device or
alternatively from the barcode on the packaging box. Otherwise, you can
enter the serial number manually.
Next, scan the cloud PIN from the information sheet enclosed with the
device. Here, too, you have the option of entering the PIN manually.
Now you can select one of the locations available in the project, or optionally
use No location to leave this item open. Bear in mind that the location
is an important setting for the configuration by SDN (Software- defined
Networking).