Power Supply - Lancom XS-6128QF Installation Manual

05 Installation Guide Switches

Power supply

Please observe the following before installation, as improper use can lead to
personal injury and damage to property, as well as voiding the warranty:
→ Use only the power adapter / IEC power cable mentioned in the Quick
Reference Guide.
→ Some models can be powered via the Ethernet cable (Power-over-
Ethernet, PoE). Please observe the relevant instructions in the Quick
Reference Guide for the device.
→ Never operate damaged components.
→ Turn the device on only if the housing is closed.
→ The device must not be installed during thunderstorms and should be
disconnected from the power supply during thunderstorms.
→ In emergency situations (e. g. in the case of damage, ingress of liquids
or objects, for example through the ventilation slots), the power supply
must be disconnected immediately.
→ Operate the device only with a professionally installed power supply at a
nearby and any time accessible power outlet.
Applications
→ The devices may only be used in accordance with the relevant national
regulations and under consideration of the legal situation applicable
there.
→ The devices must not be used for the actuation, control, and data
transmission of machinery that, in case of malfunction or failure,
may present a danger to life and limb, nor for the operation of critical
infrastructures.
→ The devices with their respective software are not designed, intended
or certified for use in: the operation of weapons, weapons systems,
nuclear facilities, mass transportation, autonomous vehicles, aircraft, life
support computers or equipment (including resuscitators and surgical
implants), pollution control, hazardous materials management, or other
hazardous applications where failure of the device or software could lead
to a situation in which personal injury or death could result. The customer
is aware that the use of the devices or software in such applications is
entirely at the customer's risk.