Lancom XS-6128QF Installation Manual page 16

15 Installation Guide Switches
In the next step, you assign various properties to the device. You give the
device a name, enter an address, and take a photo of the installation. The
address can be determined with the GPS information from your device.
In the final step, the information is displayed once again for checking. If you
find any errors, simply go back and correct the corresponding entry.
Click or tap add device to pair the device with the LMC. You will immediately
see it in your project and can make other settings if necessary. As soon as
you connect the device and it connects with the LMC, it is provisioned with
an initial operating configuration based on the SDN settings, and the status
changes to "online".
Integration into the LMC by activation code
This method uses LANconfig and just a few steps to integrate one or more
LANCOM devices simultaneously into the LANCOM Management Cloud.
Create an activation code
In the LANCOM Management Cloud, open the Devices view and click Add
new device, then select the desired method, here Activation code.
Create an activation code by following the instructions in the dialog. This
activation code allows you to integrate the LANCOM device into this project
at a later time.
The Activation code button displays all of the activation codes for this
project in the Devices view.