Power Cable Assemblies - Hitachi G400 Hardware Reference Manual

Power cable assemblies

For information about racks and power distribution units (PDUs), refer to the Hitachi Universal
V2 Rack Reference Guide.
Hitachi power cables consist of three parts:
Plug: Male connector for insertion into the AC outlet providing power. The physical design
■
and layout of the plug's contact meet a specific standard.
Cord: Main section of insulated wires of varying length, whose thickness is determined by
■
its current rating.
Receptacle: Female connector to which the equipment attaches. The physical design and
■
layout of the receptacle's contacts meet a specific standard. Common standards are the
IEC C13 receptacle for loads up to 10 amperes (A) and the IEC C19 receptacle for loads
up to 15 A.
Number
1
1
2
3
3
2
4
3
5
6
7
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide
Country or Voltage rating
region (VAC)
North America 100-127
Brazil 200-240
Japan 100-127
Taiwan 100-127
North America 100-127
North America 200-240
North America 200-240
North America 200-240
Hong Kong 200-240
Singapore 200-240
Chile 200-240
Italy 200-240
Argentina 200-240
Appendix F: Data and power cables
Power cable assemblies
Current rating
(amperes) Plug type
15 NEMA 5-15P
10, 20 NEMA 5-15P
12 JIS C8303
12, 16 CNS 690
20 NEMA 5-20P
20 NEMA L6-20P
30 NEMA L6-30P
30 NEMA L15-30P
13 BS-1363
13 BS-1363
10, 16 CEI 23-50
10, 16 CEI 23-50
10, 15 IRAM 2073
97