Filling and starting up the cooling unit
Filling the cool-
ing unit
Danger from electric current.
An electric shock can be fatal.
▶
▶
▶
Risk from coolant leakage
This can result in serious damage to property.
▶
▶
Risk due to work that has been carried out incorrectly
This can result in serious damage to property.
▶
1
WARNING!
Turn the power source mains switch to the "O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all work
has been completed.
CAUTION!
If there is any coolant on the exterior of the cooling unit, remove it immediately.
Make sure that no coolant gets into the device.
CAUTION!
If the coolant connections are on the front of the cooling unit, carry out the following
steps as shown – but at the front coolant flow connection (blue).
2
39