CU 1400i Pro /MC (professional version)
-
-
To operate the cooling unit with the TPS 320i / 400i / 500i / 600i, TT 300i / 400i / 500i and
MW 300i / 400i / 500i power sources, the OPT/i TPS 2. NT241 CU option 1400i must be
fitted in the power sources.
Application area
The cooling unit can be used for:
-
-
-
-
Scope of supply
The scope of supply comprises:
-
-
-
-
Validity of "Gen-
With respect to cooling units, the "General Delivery and Payment Conditions" as stated
eral Delivery and
in the price list only apply under the conditions listed below.
Payment Condi-
tions"
CU 800i, CU 800i /460 V, CU 1100i, CU 1100i /460 V, CU 1100i /MV, CU 1100i /MV RVP:
-
-
-
CU 800i Pro, CU 1400i Pro, CU 1400i Pro /MC:
-
-
-
Coolant pump
The following coolant pump service life figures apply to the following cooling units:
service life in
-
cooling units for
-
single-shift oper-
-
ation
-
If used properly, the coolant pump will have a service life of approx. 10,000 operating
hours. After the end of its nominal service life, the coolant pump could develop a fault. To
avoid a lengthy period of work disruption, the pump should be scheduled for replacement
after approx. 10,000 operating hours.
20
For multi-shift operation, multivoltage operation, 600 V operation
The coolant pump and fan are controlled electronically as standard. The operating
status of the cooling unit can be manually changed by selecting different operating
modes.
water-cooled MIG/MAG manual welding torches
water-cooled MIG/MAG machine welding torches
water-cooled MIG/MAG robot welding torches
water-cooled TIG manual welding torches
Cooling unit
5 l coolant in a canister
Four 5x25 mm self-tapping screws
Operating Instructions
max. 8 hrs operation per day (single-shift operation)
only original Fronius coolant is used
with regular maintenance and regular change of coolant
for multi-shift operation
only original Fronius coolant is used
with regular maintenance and regular change of coolant
CU 800i, 1100i
CU 800i /460 V, 1100i /460 V
CU 1100i /MV
CU 1100i /MV RVP