Fitting the cooling unit to the trolley
General
The welding system can be fitted to a trolley to make the system (incl. cooling unit) more
mobile.
Risk due to work that has been carried out incorrectly.
This can result in serious damage to property
▶
Fitting the cool-
1
ing unit to trolley
CAUTION!
If the welding system is not equipped with an auto-transformer, the cooling unit must
be installed right at the bottom.
CAUTION!
Risk due to work that has been carried
out incorrectly.
This can result in serious damage to prop-
erty
▶
Please see the respective trolley
Operating Instructions and Installation
Instructions for more information
about the trolley.
NOTE!
Screws are supplied with the trolley.
35