Connect The Coolant Hoses To The Cooling Unit; Safety; Connecting The Interconnecting Hosepack Coolant Hoses To The Cooling Unit; Tps 270I C, Tps 320I C, Tt 300I - 500I, Mw 300I - 500I: Connecting The Welding Torch Coolant - Fronius CU 1100i Operating Instructions Manual

Connect the coolant hoses to the cooling unit

Safety

Danger from electric current.
An electric shock can be fatal.
▶
▶
▶
Connecting the
1
interconnecting
hosepack coolant
hoses to the
cooling unit
TPS 270i C,
1
TPS 320i C,
TT 300i - 500i,
MW 300i - 500i:
connecting the
welding torch
coolant hoses to
the cooling unit
38
WARNING!
Turn the power source mains switch to the "O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all work
has been completed.
1
2
3
4
1
2
NOTE!
Use the colour codes to connect the
coolant hoses to the appropriate
coolant flow and return connections on
the cooling unit.
NOTE!
Use the colour codes to connect the
coolant hoses to the appropriate
coolant flow and return connections on
the cooling unit.
NOTE!
If a TPS 270i C power source is used
with a CU 800i Pro cooling unit, the
cooling unit will not benefit from the
maximum pump power.
NOTE!
If a TPS 320i C power source is used
with a CU 1400i Pro or CU 1400i
Pro /MC cooling unit, the cooling unit
will not benefit from the maximum
pump power.