Panasonic KX-F1050 Operating Instructions Manual page 49

Changing the logo print position
The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner
OUT Outside of the transmitted document's paper size (pre-selected setting)
IN: Inside of the transmitted document's paper size
To change the setting, proceed as follows
1 Press (MENU)
SYSTEM SET UP
LOGO POSITION
2 Press (+), then (2Y(1)
Press
MODE-OUT [AV
Press [a] or [Y] to select the desired
setting
Press [START/SET
Press (MENU)
Ooo A C
Changing the display contrast
Use this feature to adjust the brightness of the display
The following choices are available
NORMAL: (Pre-setected setting)
LIGHT: Used when the display contrast Is too dark
DARKER: Used when the display contrast is too light
1 Press (MENU)
SYSTEM SET UP
o
D
D
x
t
=.
o
2
o
paoue
2 Press ($), then (3119)
3 Press
MODE-NORMAL [ AW]
OQO >
setting
Press
Dial keypad
6 Press (MENU)
49