Panasonic KX-F1050 Operating Instructions Manual page 31

TONE, FLASH and REDIAL/PAUSE buttons
The TONE ( X) button is used for rotary pulse dial Es ==
services, and allows you to temporarily change
T
oo
from pulse to tone mode during a dialing operation - © joo
When you hang up, the unit will automatically
Lo.
MEE
return to pulse mode
ODO
a
CO CC» =>
FLASH button
The FLASH button functions as the hookswitch on
a regular phone If you misdial or dial another
phone number, press the FLASH button firmly REDIAL/PAUSE
cecooo!Q9
The FLASH button also allows you to use special
features of the host exchange (if connected) or
local telephone company services such as call Note:
waiting For further details, contact your local *TONE, FLASH and PAUSE can be stored
telephone company into a phone number for automatic dialing
Entering pauses
If the REDIAL/PAUSE button is pressed during dialing, a pause will be inserted
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside line
Line access code
Example-2' If transmission errors occur when making an overseas transmission, add two pauses at the end of
the phone number
International County Phone PAUSE PAUSE
access code code number
Redialing the last number dialed
If the REDIAL/PAUSE button is pressed immediately after a dial tone is obtained, the last number dialed will be
redialed
O
o
o
=
c
=.
o
2
o
poou
1 Lift the handset or press [MONITOR
2 Press (REDIAL/PAUSE
elf the line is busy when using the monitor, the unit will automatically redial the number up to 14 times
31