Panasonic KX-F1050 Operating Instructions Manual page 66

Insert the film into the cartridge so that the
arrow on the open cartridge points in the
same direction as the arrows on the film
«lf you insert a film which is partially used,
insert the unused spool of the film in the
"FILM SUPPLY" mark side of the
cartridge
elnsert the film
cores correctly iaioa
referring lo the Correct
y
illustration on the
10
11
12
13
66
pai EAA
Roll the blue leader o! the film by winding
the core gears until the leader is no longer
visible
Close the covers of the cartridge by
locking the four tabs
Turn over the cartridge and referring to
the illustration on the left, place the
"BACK" side of the cartridge into the unit
by inserting the side pins of the green
gears into the green holders Then lower
the front of the cartridge into place
Press the head unit down firmly until it
clicks into place
Close the top cover securely by pushing
down on both sides
elf the blue leader of the film is not wound
completely, the unit will automatically
advance it and the following message will
be displayed
LOADING FILM
elf the following message Is displayed, the
film is not correctly inserted in the
cartridge
CHECK FILM
Reinsert it correctly by referring to step 8
above