Panasonic KX-F1050 Operating Instructions Manual page 58

Error codes on your PC when using Multi Function Center
software
If an error accurred when functioning the printer or scanner using Multi Function Center software on your PC, the
error code ts shown in the 8 digits on the Status Log window as follows
The meaning of each digit of the error cade is different according to the function you are using If an error ac-
curred using the printer function, see below In case of using the scanner function, see page 59
EET Message Center - [Status Log) <<
E AAA
TERRE RE m
i ENT "Ise Uer HT HIP O Fase Dutton
Panis rii esch Em code ~ DENT OOK)
i Far Help press Fl eas OU BO x D item(s) i 190 al new (emt, |
E Error code in the status of "Printer not ready "
Paper:
When this digit is "1", the unit ran out of paper Install
paper
Paper jam near the paper cassette
When this digit is "1", Ihe recording paper is jammed near
Ihe paper cassette Clear the jammed paper (p 62)
Paper jam near the head unit:
When this digit ts "1", the recording paper jam occurred
near the head unit. Clear the jammed paper (p 61)
Cover open
When this digit is "1", the top cover is open Close it
Film:
When this digit is "1", film is empty or the film is not
inserted in the cartridge correctly Replace the film or
film cartridge with a new one (p 65) or reinsert the film
carrectly by referring to step B an page 66
Unit overheat
When this digit is "1", the unit is overheated Leave it to
coo! down
58