Panasonic KX-F1050 Operating Instructions Manual page 20

Transmitting documents
Documents you can send
Minimum size Maximum size Effective scanning area Document weight
Single sheel
ES pa 45 to 90 g/m? (12 lo 24 Ib)
5n
[a
Scanned
Multiple sheets
DN
= x area 60 to 75 g/m? (16 lo 20 Ib )
E
Mamm E 4mm
(57) D
Y 208mm (B3/1&")
E — —— —— | Paper width
216mm (B1/2") 216mm (81/27)
Note
«Remove clips, staples or other similar fastening objects from the document
»Check that ink, paste or correction fluid on the documents has dried
«Do not send the following types of documents Use copies for fax transmission
—Chemucally treated paper such as carbon or —Paper with a faint image
carbanless duplicaling paper —Paper with printing on the opposite side that can
—Electrostatically charged paper be seen through the front (e g newspaper)
—Heavily curled, creased or torn paper
—Paper with a coated surface
Loading documents
(RESOLUTION)
1 Insert the documents FACE DOWN until a
beep tone is heard
«The unit can accept up ta 15 sheets of
paper at a time
Adjust the document guides ta the width
2 of the documents
3 Press (RESOLUTION) repeatedly to the
desired setting
eThe selected resolution will be shown on
the display
STANDARD For printed or typewritten
originals with normal-sized
characters
FINE: For originals with small
printing The resolution of KX-F1050/KX-F 1070 apply to on
SUPER FINE For originals with minute your PC as follows
photographs, shaded FINE . — |
drawings, elc
SUPER FINE
HALF TONE Photagraph
Note:
-Using the FINE, SUPER FINE or HALF TONE setting will increase transmission time
slf the resolution setting is changed during page feeding, it will be effective from the next sheet
eThe SUPER FINE resolution only works with other compatible machines
20
Document guides