Panasonic KX-F1050 Operating Instructions Manual page 36

Remote fax receiving
(using an extension phone to receive a fax message)
If you have an extension phone on the same line, it is possible to receive a manual fax message Using the
extension phone, dial the remote fax activation code
This saves you from going to the facsimile unit and pressing [START/SET
Important.
«To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY
s The remote fax activation code is set to " x x" as a pre-selected setting
Receiving using an extension phone
1 When a call is received, lift the handset of
the extension phone
2 When
—document reception is required,
—-a slow beep is heard, or
—4no sound is heard,
press * X (remote fax activation code)
FIRMLY
To EXT. Jack or
the same line
3 Replace the handset
eThe facsimile unit is activated for Extension phone
reception
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character *
This code should not be set to "0000"
1 Press (MENU)
2 Press (#), then (4)(1)
DOS o
3 Press (START/SET ¡DOS =
CODE= * * (CO Go GL»
¡ODO
4 Enter the new code number
Dial keypad START/SET
5 Press (START/SET
Note:
6 Press (MENU) eSome special telephone company services will
require you to enter a service access code If you
subscribe to such services, whole or part of the
remote fax activation code must be different from
the service access code