Panasonic KX-F1050 Operating Instructions Manual page 30

Voice contact
(talking to the caller during or after fax reception or transmission)
You can have a conversation with the same call after the fax message is completed. This will save the extra
expense and lime ol making another call.
This feature works only when the olher party's unit is equipped with a voice contact feature.
Initiating voice contact
1 Press (MONITOR) while transmitting or
receiving documents.
VOICE STANDBY
» Your unit will call the other party with a
distinctive ring.
2 When the other party answers, the unit
will ernit a distinctive ring.
Lift the handset to start talking.
»|f you initiate voice contact during
transmission, you can talk after all the
documents have been transmitted.
elf you initiate voice contact during
reception, you can talk after the current
page of the document is received.
«You can initiale voice contact by lifting
the handsel during transmission or
reception.
elf other party does not answer, the line
will be automatically disconnected.
Receiving a request for voice contact
If the other party initiales voice contact, your unit will emit a distinctive ring after transmission or reception is
completed.
When the distinctive ring is heard, lift the handset, then start talking.
Note:
slf you da nat answer within 10 seconds of hearing the distinctive ring, the line will be automatically
disconnected.
JO