Yale Keyless Connected User Manual page 9

The lock can hold up to 20 unique user codes, each one has a slot in the locks memory from 1 to 20. If a new code is
written to a slot that already holds a code it will overwrite it. Because of this it is important to record which codes are stored
in each slot. Please use the section in the back of the book to record this.
Step
Touch the Keypad with the
palm of your hand
Enter the master code,
followed by # key
Select the [2] button followed
by # key
Press the [1] button and then #
Enter the slot number for the
user code followed by # key
Enter the new user code
followed by # key
To add multiple codes please complete the above instructions, record that the memory slot has been filled in the user
code log at the back of this guide, then repeat this process.
Expected Feedback
Icon
Keypad will illuminate
followed by 2 tone beep
2 tone beep
2 tone beep after each
button pressed
2 tone beep after each
button pressed
2 tone beep
3 tone ascending beep
Followed by your new
code being illuminated
Setting a User Code
Description
Touch the Keypad to begin
If you have forgotten the master code please
see the resetting the lock section of the
manual.
You are now in the lock's menu, choose option
number 2 to select the user code setup.
Option number 1 adds or modifies a user
code
This is the number of the slot in memory
where the code will be saved (1-20)
The user code can be between 4-10 digits
9