Yale Keyless Connected User Manual page 12

The lock can hold up to 20 RFID cards or tags, each one has a slot in the locks memory from 1 to 20. If a new card/tag is
written to a slot that already holds a tag it will overwrite it. Because of this it is important to record which cards/tags are
stored in each slot. Please use the section in the back of the book to record this.
Step
Touch the Keypad with the
palm of your hand
Enter the master code,
followed by # key
Select the [0] button followed
by # key
Press the [1] button and then #
Enter the slot number for the
user code followed by # key
Present the RFID Card/
Tag to to lock
Press # key
To add multiple RFID cards/tags please complete the above instructions, record that the memory slot has been filled
in the user code log at the back of this guide, then repeat this process.
12
Adding an RFID Card/Tag
Icon
Expected Feedback
Keypad will illuminate
followed by 2 tone beep
2 tone beep
2 tone beep after each
0
button pressed
2 tone beep after each
button pressed
2 tone beep
Single tone beep followed by
slot number illuminating
3 tone ascending beep
Description
Touch the Keypad to begin
If you have forgotten the master code please
see the resetting the lock section of the
manual.
You are now in the lock's menu, choose option
number 0 to select the RFID card/tag setup.
Option number 1 adds an RFID card or
tag.
This is the number of the slot in memory
where the code will be saved (1-20).
Hold an RFID card or tag against the
keypad until you bear the beep.
The card or tag is now added and will
unlock the door.