Yale Keyless Connected User Manual page 21

Disconnecting from a Home Automation System
For security reasons a lock will not connect to a new home automation system if it is linked to another. If you have
changed your home automation system please run through the disconnecting settings before adding the new one.
Step
Touch the Keypad with the
palm of your hand
Enter the master code,
followed by # key
Press the [4] button followed by
# key
Press the [3] button followed by
the hash key
Icon Expected Feedback
Keypad will illuminate
followed by 2 tone beep
2 tone beep
2 tone beep after each
button pressed
3 tone ascending beep
Smart Home
Description
Touch the Keypad to begin
If you have forgotten the master code
please see the resetting the lock
section of the manual.
You are now in the lock's menu, option 4
contains the home automation settings
This will disconnect the lock from the
previous system
21