Download Print this page

Insignia KY003 Series Installation Manual page 24

Infrared sauna

Advertisement

2
1
3
4
6
5
7
9
8
10
11
12
www.insigniashowers.com
Press to activate Sauna heaters. Pressing once will put the heaters on at 100%. Twice = 90%. Three times = 80%. Four
Press to cycle through the coloured lights. Each press will change colour until a full cycle is completed and they turn off.
Press to turn the fan on, press again to turn it to auto and then a third time to turn it off.
Press to display temp, then cycle through desired temperature setting (max 60°C) using up and down arrows (Buttons 6/8). Press
again to display time, then cycle through desired time setting (max 99 mins) using up and down arrows (Buttons 6/8).
Use to cycle up or down through various setting options. As standard these operate the volume until other settings are
Use to Play/Pause music through various settings. When searching and tuning the radio, use to save a desired frequency
Press and use the arrows (Button 5/11) to manually search. Hold to tune radio stations automatically.
Press to cycle through the audio options, Radio/MP3/USB/Bluetooth or AUX.
Press to activate the alarm, press again to deactivate it. Activating the alarm will cause all sauna heaters to automatically turn off.
Use to power the control panel on or off. Also use to unlock he panel (enters lock mode automatically after 60 seconds of inactivity).
Control Panel Instructions
Button 1/2 (Sauna Heaters)
times = 70% and five times = Off.
Button 3(Lights)
Button 4 (Fan)
Button 5 (Time/Temp)
Button 6/8 (Up and Down Arrows)
activated.
Button 7 (Play/Pause/Memory)
to a specific channel.
Button 9 (Set)
Button 10 (Audio Mode)
Button 11 (Alarm)
Button 12 (Power)
Last Modified: 03/10/2023
24

Advertisement

loading