Advertisement
Step 4 — Connecting the Heater Wires
8 x ST50mm Screws
Using the ST 50mm screws, secure the side bench panels in the
eight corners.
To connect the wires to the heaters behind the bench panel,
locate the black power wire with multiple white wires attached
which will connect to the left bench heater. The black power
wire with the one white wire will be connected to the right
heater. Ensure the earth wire is screwed into place on the bolt
behind the heater.
www.insigniashowers.com
Last Modified: 03/10/2023
10
Advertisement
