Table of Contents
Advertisement
Safety Instructions
Chapter
This chapter provides you with mandatory safety instructions you must
Overview
follow when you operate your PC and its components.
This device corresponds to the relevant safety measures according to IEC,
EN, VDE, UL and CSA. If you have questions about the permissibility of
the installation in the designated environment, please confer with our service
representative. Chapter 5 contains the service address locations.
1.1
General Notes
Transport
We recommend that you transport the device only in the original packaging
(protection against shock and impact).
Installation
Condensation can occur if the device is transported from a cold environment
into the operating area. The device must be dry prior to startup. You must
allow for an acclimatization time of at least four hours.
Please observe the notes on ambient conditions in Section 1.4, "Technical
Specifications," and the installation notes in Chapter 2 of this manual when
installing and operating the device.
Be sure the fan ventilation slots are open so that a sufficient amount of air can
be drawn in to cool the housing interior.
The sliding door in front of the drives on the front side must be kept closed
for safety reasons (fire protection according to UL 1950/EN 60950). You
may open the sliding door only to service the drives. You must not remove
the sliding door.
SIMATIC PC RI25/45
C79000-G7076-C806-01
1
1-1
Advertisement
Table of Contents
