TVS Jupiter BS-V1 Owner's Manual page 68

FRONT WHEEL REMOVAL AND REASSEMBLY
1. Remove the axle nut (1) along with a washer.
2. Pull out the axle (2) along with a washer and take
out a spacer from the left side of the wheel.
3. Place a support below the foot board to prevent
the vehicle from falling and lift the vehicle up.
4. Dislocate the wheel assembly along with brake
the panel from front fork. Separate the brake
panel from the wheel and take out the wheel.
5. Reverse the procedure for reassembling. While
reassembling ensure to locate the lug on fork leg
L to the slot in the brake panel.
1
62
REAR WHEEL REMOVAL AND REASSEMBLY
1. Place the vehicle on the centre stand.
2. Hold the rear brake firmly and remove the wheel
3. Slightly tilt the vehicle and take out the wheel
4. Reassemble the wheel in the reverse order of
2
Always make sure, whenever the wheel is removed, the
axle nuts are tightened properly to the specified torque.
mounting nut (A) along with a washer.
from the rear axle.
removal.
A