TVS Jupiter BS-V1 Owner's Manual page 59

6. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
7 . Assemble back the gauge oil level.
TRANSMISSION OIL - LEVEL
Check the transmission oil level periodically.
If the vehicle is driven with less engine and transmission
oil, the engine components will be severely damaged.
Check the oil level as per the schedule to avoid costly
damage. Do not fill excess oil may cause oil leak. Always
use 'TVS TRU4 SKUUTA (SAE 10W30 API-SL, JASO
MB)' oil only.
1. Place the vehicle on centre stand on a flat surface.
2. Wipe-off the surroundings of oil level screw.
3. Remove the transmission oil level screw along
with a gasket from the rear end of crankcase L.
4. Check for the flow of oil from oil level hole.
5. If the level is less (if there is no oil flow), top-up
with 'TVS TRU4 SKUUTA (SAE 10W30 API-SL,
JASO MB)' oil till the oil just starts to flow out
from the oil level hole.
6. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
7 . Replace the fiber washer while reassembling the
oil level screw.
53
53