TVS Jupiter BS-V1 Owner's Manual page 32

4. Parking brake (rear brake lock lever)
Brake lock protects your scooter from rolling-off,
when parked on side stand
waiting in a long traffic signal (or) a slope.
To activate brake lock, press the brake lever almost
half towards the grip and hold, then press the parking
brake lever to maximum and release the brake lever
slowly. Ensure the brake is locked properly. Pressing
the brake lever further releases the brake lock
automatically.
5. High/low beam cum pass-by switch
The head lamp glows automatically once the
engine is started. Only the head lamp beam (high
/ low) can be controlled by pressing the 'high /
low beam' switch.
Press the switch towards '
high beam or press it towards '
lamp low beam.
TVS Jupiter has a combined switch for head lamp
'high / low beam' and 'pass-by'. To operate the
pass-by, keep the switch in 'low beam' position,
press gently and release.
26
(or) helps you relax while
#
' to operate head lamp
' to operate head
This makes the head lamp high beam to flash and
signal the approaching vehicle. The pass-by signal can
be used while overtaking during day time.
Use appropriate head lamp beam 'high / low' as per
the traffic and road conditions for your safety and
to avoid inconvenience to other riders. It is strongly
recommended to ride the vehicle in 'low beam' during
day.
Side stand and side stand sensor are provided as accessory
#
and will be charged extra