Page 1
LMVF Installation Guide Flat Large Matrix Video Wall Mount premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com 500 W Central Ave, Suite A, Brea, CA 92821 USA...
LMVF Installation Guide Wood Stud Installation Use a pencil to mark the upper right mounting location of the wall stud. the vicinity of the mount. 2. Use a pencil to mark each of the wall studs. 1. Place the mount against the wall and align it with the pilot hole.
Page 4
LMVF Installation Guide 1. Level the mount Drill a pilot hole in each of the three (3) marks with a 2. Use a pencil to mark the remaining three (3) power drill and a M6 or 1/4” drill bit. mounting locations 1.
LMVF Installation Guide Concrete Wall Installation Two people recommended for this step; one person Drill a pilot hole in each of the four (4) mark areas to level the mount and another person to mark the with a 3/8” masonry drill bit.
Page 6
LMVF large matrix video wall. Plumb and level and mark each corner where the LMVF will be mounted (or secure to the wall). Install the second mount working in a horizontal direction.
LMVF Installation Guide Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. Mark the straw or toothpick 1/8” above the depth of the threaded insert, as shown in Figure 1.
LMVF Installation Guide Universal Washer Installation Universal Washers are designed to accommodate the various M5, M6 Identify the number and location of the thread inserts on the Aligning the holes on each mounting bracket with the thread minimum of two (2) screws per bracket.
Engage the top and bottom mounting brackets to the rails of the mount. Locking Safety Screw Installation being accidently dislodged from the LMVF. Locate the pre-installed security locking safety screw at the bottom of each of the mounting brackets. Use the M5 Allen driver (supplied) to tighten the locking safety screw.
Page 10
LMVF Installation Guide MOVE INWARD Left Right Control Control BOTTOM BOTTOM MOVE OUTWARD Left Right Control Control BOTTOM BOTTOM TILT UP Left Right Control Control BOTTOM BOTTOM TILT DOWN Left Right Control Control BOTTOM BOTTOM premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com...
Page 11
LMVF Installation Guide LEVEL UP Left Right Control Control LEVEL LEVEL LEVEL DOWN Left Right Control Control LEVEL LEVEL ROTATE LEFT Left Right Control Control LEVEL LEVEL ROTATE RIGHT Left Right Control Control LEVEL LEVEL premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com...
Page 12
LMVF Installation Guide Use the GAPit GO/No Go Gauge (supplied with model specific spacer) as a final step in the process to inspect and adjust the gap to prevent costly replacement and extend the lifespan of the displays. Damage happens when weight is transferred to the ultra-thin bezels of video wall installations, This results in image distortion, and costly repairs and replacement 1.
Page 13
LMVF Installation Guide Servicing 1. Loosen the locking safety screws on both mounting brackets. the mount (Figures 2). Figure 1 Figure 2 premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com Page 13...
Page 14
Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Need help?
Do you have a question about the LMVF and is the answer not in the manual?
Questions and answers