Table of Contents
Advertisement
Quick Links
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
Phone: 800-368-9700
Fax: 800-832-4888
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2009
9531-211-001-04
INSTALLATION INSTRUCTIONS
Universal Low Profile Swingout Arm for 37" to 47" Flat Panels
LPSA3747
Shilton, Coventry, England CV79JY
EUROPE
Swallow House,
Shilton Industrial Estate,
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Premier Mounts LPSA3747
Summary of Contents for Premier Mounts LPSA3747
- Page 1 Anaheim, CA 92806 USA Shilton Industrial Estate, USA and Canada – Shilton, Coventry, England CV79JY Phone: 800-368-9700 Phone: +44 (0) 2476 614700 Fax: 800-832-4888 Fax: +44 (0) 2476 614710 Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2009 9531-211-001-04...
-
Page 2: Table Of Contents
PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED... -
Page 3: Parts List
LPSA3747 Parts List Congratulations on the purchase of your new Premier Mounts LPSA3747 flat panel mount. This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800) 368-9700. - Page 4 M8 x 25mm (Qty 6) M6 x 25mm (Qty 6) M8 x 16mm (Qty 6) M6 x 16mm (Qty 6) If your unit requires alternative mounting hardware, use commercially available hardware or contact Premier Mounts (800) 368-9700. Page 4 Installation Instructions...
-
Page 5: Wood Stud Installation
LPSA3747 Wood Stud Installation Before proceeding, remove the wall plate from the cover plate. Level Stud Center Line Wall Plate Electronic Studfinder Step 1. Determine the mount’s location on the wall. Step 2. Use a stud finder to locate the nearest wall stud closest to your desired location. -
Page 6: Concrete Surface Installation
LPSA3747 Level #14 x 2” Screws Screwdriver Step 5. Insert one (1) #14 X 2” screw into the pre-drilled mounting hole. Step 6. Tighten the top screw. Step 7. Re-level the mount and make any Step 8. Pre-drill the remaining three mounting adjustments at this time. - Page 7 LPSA3747 Step 3. Once the holes have been drilled, place wall anchors into the hole. Using a hammer, gently tap into place. Make sure the mounting surface area is smooth and that the wall anchors are not protruding from the wall.
-
Page 8: Determining The Mounting Hardware
LPSA3747 Determining the Mounting Hardware Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel. Step 2. Using a pencil, mark the depth of the thread insert on the thread depth indicator (Figure 2). -
Page 9: Attaching The Flat Panel (75Mm/100Mm Mounting Points)
LPSA3747 Attaching the Flat Panel (75mm/100mm Mounting Points) If your flat panel comes with 75/100 mounting points on the back (see illustration to the 75/100 Mounting Points right), the adapter plate will not be used. These installation steps should be performed by two qualified individuals. -
Page 10: Lpsa3747 Installation
This locking screw will prevent the mount and flat panel Step 1. The cover plate of the LPSA3747 must be from being lifted off of the wall plate. mounted to the wall plate that is attached to the wall. -
Page 11: Assembling The Adapter Plate
Assembling the Adapter Plate In the event that the mounting points on your flat panel exceed the standard 75/100 mounting pattern on the LPSA3747, the adapter plate will have to be used. The adapter plate will accommodate mounting patterns of 600mm x 400mm. -
Page 12: Universal Washer Installation
LPSA3747 Universal Washer Installation The universal washer will fit M4, M5 M6 and M8 hole patterns that your flat panel requires. EXAMPLE: If your flat panel uses M8 screws, use the M8 mounting points. Pre-install the mounting screws, spacers and washers. -
Page 13: Attaching The Adapter Plate To The Flat Panel
LPSA3747 Attaching the Adapter Plate to the Flat Panel Step 1. Place the flat panel on a soft and flat surface. Step 2. Locate the mounting holes that are on the back of the flat panel. Step 3. Place the mounting arms over the mounting points. -
Page 14: Lpsa3747 Installation With The Adapter Plate
Step 3. Use the M3 Allen wrench (supplied) to tighten the locking screw that is located on the bottom of Step 1. The cover plate of the LPSA3747 must be the mount base. mounted to the wall plate that is attached to the This locking screw will prevent the mount and flat panel wall. -
Page 15: Tension Adjustment
Adjustment Nuts Before routing the cables and attaching the tie wraps, the LPSA3747 must be fully extended away from the wall. The cable access ports may be accessed by removing the plastic caps. The cable access ports allow you to route your cables through the base of the LPSA3747 and into the wall. -
Page 16: Technical Specifications
LPSA3747 Technical Specification All measurements are in inches(mm). Installation Instructions Page 16... -
Page 17: Warranty
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the LPSA3747 and is the answer not in the manual?
Questions and answers