Related Manuals for Premier Mounts LMVSP
Summary of Contents for Premier Mounts LMVSP
- Page 1 LMVSP POP AND RELEASE ULTRA SLIM MOUNT Installation Guide premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com 500 W Central Ave, Suite A, Brea, CA 92821 USA 9531-000-013-0X v3.1 10/03/18...
-
Page 2: Included Components
LMVSP Installation Guide Maximum Flat Panel Weight: Included Components 100 lb. / 45.35 kg. Wall Mount Extension Bracket Bracket (Qty 1) (Qty 1 Pair) (Qty 1 Pair) 5/16” Flat Washers Universal Spacers M5 Allen Driver Thread Depth Indicator Universal Washers... -
Page 3: Wood Stud Installation
LMVSP Installation Guide Wood Stud Installation Use a pencil to mark the upper right mounting location of the wall stud. the vicinity of the mount. 2. Use a pencil to mark each of the wall studs. 1. Place the mount against the wall and align it with the pilot hole. - Page 4 LMVSP Installation Guide 1. Level the mount Drill a pilot hole in each of the three (3) marks with a 2. Use a pencil to mark the remaining three (3) power drill and a M6 or 1/4” drill bit. mounting locations 1.
-
Page 5: Concrete Wall Installation
LMVSP Installation Guide Concrete Wall Installation Two people recommended for this step; one person Drill a pilot hole in each of the four (4) mark areas to level the mount and another person to mark the with a 3/8” masonry drill bit. - Page 6 LMVSP large matrix video wall. Plumb and level and mark each corner where the LMVSP will be mounted (or secure to the wall). Install the second mount working in a horizontal direction.
-
Page 7: Selecting The Mounting Hardware
Mark Mark Securing the Adapters Optional adapters are available with the LMVSP mount. Secure the adapters to the LMVSP brackets with the supplied (4) M8 washers and (4) M8 nuts. BOTTOM premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com Page 7... -
Page 8: Universal Washer Installation
LMVSP Installation Guide Universal Washer Installation Universal Washers are designed to accommodate the various M5, M6 Identify the number and location of the thread inserts on the Aligning the holes on each mounting bracket with the thread minimum of two (2) screws per bracket. -
Page 9: Locking Safety Screw Installation
Engage the top and bottom mounting brackets to the rails of the mount. Locking Safety Screw Installation being accidently dislodged from the LMVSP. Locate the pre-installed security locking safety screw at the bottom of each of the mounting brackets. Use the M5 Allen driver (supplied) to tighten the locking safety screw. - Page 10 LMVSP Installation Guide MOVE INWARD Left Right Control Control MOVE OUTWARD Left Right Control Control TILT UP AND/ TILT DOWN AND/ premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com Page 10...
- Page 11 LMVSP Installation Guide LEVEL UP Left Control Right Control LEVEL DOWN Left Control Right Control ROTATE LEFT Left Control Right Control ROTATE RIGHT Left Control Right Control premiermounts.com | p. 800.368.9700 | e. orders@premiermounts.com Page 11...
-
Page 12: Maintenance
Maintenance Single Latch Spring Lock Figure 1 1) Push evenly in the front of the LMVSP to release the single latch spring lock (Figure 1). 2) Slowly pull the front of the LMVSP to extend the scissor arms (Figure 2). - Page 13 LMVSP Installation Guide Use the GAPit GO/No Go Gauge (supplied with model specific spacer) as a final step in the process to inspect and adjust the gap to prevent costly replacement and extend the lifespan of the displays. Damage happens when weight is transferred to the ultra-thin bezels of video wall installations, This results in image distortion, and costly repairs and replacement 1.
- Page 14 How State Law Applies Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Need help?
Do you have a question about the LMVSP and is the answer not in the manual?
Questions and answers