Advertisement
Quick Links
LPWS200
Installation Tools
(not supplied)
1/4" Drill Bit
Wood Stud Installation
Stud Finder
Step 1.
Determine where the shelf will
be installed on the wall.
Step 2.
Use a stud fi nder to locate the wall stud.
Step 3.
Use a pencil to mark where the
stud is located.
Solid Surface Installation
Mounting
Location Mark
Mounting
Column
Level
Step 1.
Determine where the shelf mount will
be installed on the wall.
Step 2.
Place the mounting column fl at
against the wall. Make sure the
mounting column is level.
Step 3.
Use a pencil to mark the holes where
the mounting column will be located.
Installation Instructions
9533-100-001-00
LPWS100/LPWS200 Shelf Installation Instructions
Glass Shelf
LPWS100
Mounting Column
Shelf Mounting Bracket
Electronic
1/8" Drill Bit
Stud Finder
Step 4.
Place the mounting column over the
located wall stud.
Step 5.
Level the mounting column.
Step 6.
Use a pencil to mark the mounting
locations (two marks for the LPWS100
and four marks for the LPWS200
mounting locations).
Step 4.
Use a 1/4" drill bit and drill to
pre-drill the mounting holes.
Step 5.
Once the mounting holes have been
drilled, insert the wall anchors by
gently pressing the wall anchors into
place.
LPWS100 -
LPWS100 -
(Qty 2)
(Qty 1)
LPWS200 -
LPWS200 -
(Qty 4)
(Qty 2)
Wall Anchors
LPWS100 -
LPWS100 -
(Qty 1)
(Qty 2)
LPWS200 -
LPWS200 -
Phillips Head Screw (Qty2)
(Qty 4)
(Qty 2)
Wood Screws
Flat Washers (Qty 2)
Drill
Hammer
Mounting
Location Mark
Mounting
Column
Level
Inserting Wall
Anchor
Wall Anchor
Gently Press
into Place
Wall Anchor
LPWS100/LPWS200
Flat Head
Glass Shelf
Cap Screw (Qty 1)
Screws (Qty 2)
Neck Knuckle (Qty 1)
Level
Pencil
Step 7.
Use a 1/8" drill bit and drill to
pre-drill the mounting holes at the
marked locations.
Step 8.
Place the mounting column against
the wall and align the mounting points
on the shelf mount with the pre-drilled
mounting holes.
Step 9.
Insert and tighten the screws and
re-level the mounting column to
verify the position.
Step 6.
Place the mounting column against
the wall and align the mounting points
on the shelf mount with the wall
anchor holes.
Step 7.
Level the mounting column.
Step 8.
Insert and tighten the screws and
re-level the mounting column to
verify the position.
Column End Caps
(Qty 2)
M3 Allen Wrench
Screwdriver
Mounting
Location Mark
Drill
Mounting
Column
Mounting
Location Mark
Drill
Mounting
Column
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Premier Mounts LPWS100
Summary of Contents for Premier Mounts LPWS100
- Page 1 Step 2. Use a stud fi nder to locate the wall stud. the wall and align the mounting points locations (two marks for the LPWS100 Step 3. Use a pencil to mark where the on the shelf mount with the pre-drilled and four marks for the LPWS200 stud is located.
- Page 2 LPWS100/LPWS200 Shelf Assembly Neck Knuckle Assembly Shelf Mounting Glass Shelf Mounting Holes Bracket (Refl ective-side up) Shelf Mounting Glass Shelf Bracket Threaded Stud (Refl ective-side down) Mounting Points Neck Knuckle Step 1. Place the glass shelf on a soft, fl at surface (refl...
Need help?
Do you have a question about the LPWS100 and is the answer not in the manual?
Questions and answers