Turning The Instrument On; Turning The Instrument Off - Human HumaFIA User Manual

2 SYSTEM DESCRIPTION
Basic steps to run a sample, explained in detail below in the description of the software
1. Turn on the analyser.
2. Insert the calibration card to upload the calibration curve (see 3.3.5 Calibration cards overview in the
QC module).
3. Select a sampling mode.
4. Add patient name or ID.
5. Add sample to cartridge and wait for incubation (see IFU for each parameter).
6. Insert cartridge into analyser for reading.
7. Automatic data storage, optional print-out of result.
8. Turn off the analyser.

2.5.1 Turning the instrument ON

Connect the power cord. Turn on the power switch on its back. Each time the instrument is turned on, it will
conduct a self-check. The system will check its hardware automatically. Once the self-test is finished, the
system will enter the Login interface of the instrument. Select Admin and type in the numbers 12345678 as
password.
Note: Not all functions/options are available in Admin mode and even less are available in User mode.
Contact your supplier to introduce changes which are only possible in Service mode.
Select the user level, type in the password, and click Login to enter the home screen (see chapter 2.6.1.4
Home screen).

2.5.2 Turning the instrument OFF

After completing the tests, turn off the power switch at the back of the instrument.
HumaFIA | User manual
Figure 2-10 Start screen
17