Installation - Human HumaFIA User Manual

2 SYSTEM DESCRIPTION
Figure 2-9 TR-FIA method explanation, graph for illustration purposes only

2.5 Installation

This chapter provides instructions for the unpacking and installation of the HumaFIA analyser. Follow the
procedures below to ensure proper operation and service. Carefully read and follow all the instructions in this
User Manual before operating the analyser. This immune-fluorescence analyser is a precision instrument:
Handle with care.
Dropping or improperly handling the instrument will disrupt or damage the calibrated mechanical and
electronic components. Inspect the instrument for any visible signs of damage incurred during shipping. If
there is any damage, file a claim with the carrier or your distributor immediately. Check the accessories
received against the packing list. Contact Service if anything is missing.
1. Unpack the instrument.
2. Place the instrument on a surface with easy access to a ground power outlet and ensure that the distance
between the instrument and the power outlet is greater than 20 cm.
3. Place the instrument in a way that the user can easily access the power switch. In an emergency, the
user can turn off the instrument with the switch or unplug the power cord.
4. The workbench should be at least 400 mm (L) x 450 mm (W) x 450 mm (D) and should be able to hold
more than 5 kg.
5. Keep enough space in front of the instrument for easy operation. Place the instrument in a stable way
to avoid impact or collision.
6. Connect the power cord to the instrument power interface.
7. Do not remove the instrument randomly.
8. Keep the room well ventilated for cooling.
To ensure the accuracy of the instrument and the comparability of the measured data, the optical part of the
instrument needs to be tested. See the description of use of the Standard Cartridge, chapter 4.9.1 Run
Standard Cartridge as quality check.
HumaFIA | User manual
16