Manual Dual Feed Setting - ELNA eXcellence 790PRO Instruction Manual

y
u
i
123

Manual Dual Feed Setting

If you wish to sew patterns other than U1 to U5 and Q1
to Q7 with the dual feed device, turn on the manual dual
feed setting.
Press the ON key y of the manual dual feed setting.
NOTE:
The sewing results of the manual dual feed sewing may
vary depending upon sewing conditions. Always make
a test stitch on an extra piece of the fabric to check the
sewing results.
You may need to adjust the dual feed balance u
depending on the type of fabric. Refer to page 41 for how
to adjust the dual feed balance.
Turn off the manual dual feed setting when the manual
dual feed sewing is finished.
NOTE:
• The dual feed key i will gray out if the manual dual
feed setting is turned on.
• The patterns U8 and B14, and the sewing applications
that are not suitable for the manual dual feed setting
are grayed out and cannot be selected.
NOTE:
If the drop feed key in the sewing setting mode is turned
on, the manual dual feed setting will gray out.
If the pattern or sewing application with the feed dog
down is selected, the manual dual feed setting will gray
out.