Rear Panel Facilities Vicwccsiws Tvs Vsinnaeaceeaatavetsadepouciawieiasdes; Setting The Unit Before Operation - Pioneer SX-337 Operating Instructions Manual

REAR PANEL FACILITIES
@
(@) FM/AM ANTENNA terminals
Use these antenna terminals for receiving FM and AM
broadcasts. |
(2) INPUT jacks
PHONO...Connect to the output cables from a turntable.
CD...Connect to the output jacks of a compact disc player.
VCR/LINE...Connect to the output jacks of a video cassette recorder,
etc.
(3) TAPE 1/DAT jacks
Connect these jacks to a cassette deck or digital audio tape deck (DAT).
(4) TAPE 2/ADAPTOR jacks
Connect these jacks to a cassette deck or Audio Adaptor.
(5) Power cord
(6) SPEAKERS terminals
A: Connect to a first set of speakers.
B: Connect to a second set of speakers.
@) GND terminal
Connect to the ground lead of a turntable.
SETTING THE UNIT BEFORE OPERATION
e Before operating the unit, be sure to set it as shown below.
DM PIONEER erewuncceve: 5X-337
Set the volume control
to the "0" position.
Press the SPEAKERS switch
corresponding to the speaker
system to be used.
Set the BALANCE control
to the center position.
Set the TAPE 2/ADAPTOR switch to OFF
(TAPE 2 indicator goes off).
Set the TONE DEFEAT switch to OFF.
8
<ARB1233>