Hitachi VT-FX8000E Service Manual page 90

Removal of Tape Drive Parts
Note: Dismantle parts in the eject state.
-__-
Item Parts to remove | Iter Parts to remove ' Item
H
yx Safety arm | 3-14
Parts to remove
% Cam gear { 3-15 * UN whee! gear 1 3-15
ke Loading gear (R) % Loading gear {L)
& Slider | 3-19
& Pulley assembly | 3-17
* Drive belt i 3-17
%& Torque change arm : 3-17
*& FR drive gear
* Transmission gear
ke FL change gear
%& Base bracket 4 3-18 *% FL idler gear | 3-18
(Removal of Guide Roller Assemblies)
Note: Dismantle parts in. the eject state.
HC mechanism | 3-8
; Cylinder base 1 3-20
Impedance plate | 3-8 -.
* Cam gear fi 3-15 %& Loading gear (L) Hl 3-16
H H
*& Loading gear (R) | 3-16 *& Guide roller ass'y! 3-20
@ How to interpret the symbols
+ Dismantle the parts marked yy after the FL mechanism has been removed,
+ Dismantle the parts marked % after the US mechanism has been removed from the VCR.
+ The parts without any marks can be replaced with the top cover removed.