Hitachi VT-FX8000E Service Manual page 8

C How to Remove the Cassette when a Malfunction Has Occurred in the Mechanism )
Ifa cassette is caught in the mechanism because of a malfunction in the mechanism, remove it
by the following procedure.
(Work Procedure]
1. Remove the top cover.
2. Remove the front panel.
Tf the tape is wound
round the cylinder in
the loading state unloading state.
If the cassette dose not come out
from the FL mechanism in the
Remove the spring and lift the pressure roller to pull it out.
Lift the pressure
rolter and pull it out
Slacken the tape and release it from the tension pole, guide rollers, inclined
guides and P out arm.
{MPEDANCE ROLLER
jemove the screw.
INCLINED GUIDE
GUIDE ROLLER
Gy < OUT ARM
wales]
} 2) Hold the cassette lid with your
not.damaged and remove the FI
3) Remove the slack tape and ej