Hitachi VT-FX8000E Service Manual page 88

[I. Before Starting Disassembly
5
1) Unplug the power cord from the AC outlet.
2) [Removal procedure]
If a special procedure is required when
dismantling any component, it is indicated
using numbers. Follow the numbers (@, @,
® ...) shown in the illustrations.
[Reinstallation procedure]
Reinstall each component in the reverse order
to removal when otherwise not specified,
Fig. 2-2 Bottom View of US Mechanism
DHONAMAPRWHe
Tension band
Supply reel disk
. Tension arm
. Supply guide roller
. Full erase (FE) head
Impedance roller
Cylinder motor
HC mechanism
. Take-up guide roller
Audio/control (A/C) head
. Capstan shaft
Pressure roller arm
. Spiral gear
PR idler gear
P, out arm
. P, drive gear
S-VHS switch (S-VHS VOR only)
. Take-up brake
Take-up reel disk
FR arm
. Idler gear 2
. Loading motor
. FL change gear
. Drive belt
. Sider
. Capstan motor
. FS brake
. Loading gear (R)
. Loading gear (L)
LM wheel gear
. Cam gear
. Torque change gear
. Pulley assembly