Advertisement
10. Cylinder Rotation Accumulated Hours of Usage Display.
Display
This VCR has a function which displays the accumulated hours of cylinder rotation as a reference for
reptacing the cylinder.
1. Method for display
3. Example of display [In case of 12,845 hours)
simultaneously holding down the "VCR channel &" and
control, with power ON and without a cassette inserted,
press the "channel up" button on the VCR. To disappear
FCEC
the display, turned off the power.
xx452301 xxxxxx xx
HXKKX KKK AK
KK
"VCR channel Y " buttons on the provided remote
:
MAIN ADDRRESS [FCDO]
2, Clearing the accumulated hours
Same as for shipment mode initial setting.
11. List of Data in EEPROM and Initial Settings
VCR DISPLAY
'The table below lists the data stored in ROM. It also shows the data set by shipment mode initialization, when the
trouble display is cleared.
Data memory ROM
List of initial data
Information
1C903 VCR
| 1C4302 NAVI } Shipment mode | Tape navi, map
Clearing of
Remarks
EEPROM
EEPROM
initial data
initial data
trouble display
Yes
No
Yes
No.
No
Yes**
No
Yes
No —
No
No
Yes
No
Yes
No
No (set by adj.
No
No.
Artificial
V sync data
Yes
No
No (set by adj.)
No
No
Switching
point data
Yes
No
No (set by adj.)
No
Tape navigation
map
dati
Yes
No
12.
L i
i
mands
The following tables list the mode setting commands during adjustment and EEPROM initial setting commands.
12-1, Mode setting commands during adjustment
Mode in which
Item
command is
Operation
Remarks
accepted
Tracking center
Play
Press the CH up(4&) and down(¥) buttons of the remote control
simultaneously.
X-value adjustment
Play
Press the CH up(4&) and down(¥) buttons of the remote control
test mode
simultaneously and press the "CHANNEL VY "button on the VCR.
Forward test slow mode | Play
Press the CH up{(&) and down(¥) buttons of the remote control
simultaneously and press the "PLAY" button on the VCR.
Reverse test slow mode | Still play
Press the CH up(4) and down(¥) buttons of the remote control
simultaneousty and press the "PLAY" button on the VCR.
12-2, EEPROM
initialization commands
Mode in which
item
command is | Operation
Remarks
accepted
Shipment mode
Press the "REC" buttons on the VCR and hold it,
Hold the "REC" button depressed
initial setting
EJECT
then press the "RESET" button used to initialize
and release it after the display
the microprocessor.
lights.
:
Clearing of
Press the "PLAY" bution on the VCR and hoid it,
Hold the "PLAY" button depressed
trouble display
then press the "RESET" button used to initialize
and release it after the display
ithe microprocessor.
lights.
3-7
Advertisement
Chapters
