3-3-2 Installing the Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR5 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1.
Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2.
Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3.
Reverse the installation steps when you want to remove the DIMM module.
2
RDIMM
RDIMM 3DS
Warning:
To avoid any potential short circuit of the DIMM slots, please remove any stand-offs
from the chassis that will be located underneath the DIMM slots, before installing
the motherboard into the chassis.
Ranks Per DIMM
Type
and Data Width
SRx8 (RC D)
SRx4 (RC C)
SRx4 (RC F) 9x4
DRx8 (RC E)
DRx4 (RC A)
DRx4 (RC B) 9x4
(4R/8R)x4
(RC A)
*1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
System Hardware Installation
1
Speed (MT/s); Voltage (V);
DIMM
DIMM per Channel (DPC)
Capacity
(GB)
16Gb
16GB
32GB
32GB
32GB
64GB
64GB
2H-128GB
4H-256GB
- 25 -
2
1DPC*
1.1V
4800