Table of Contents
Advertisement
5-3-7 PCH Configuration
Parameter
PCH-IO Configuration
SATA And RST Configuration
Only appears when HDD sets to RAID Mode.
(Note)
Description
SATA Controller And RST Configuration
Š
– Press [Enter] to configure advanced items.
•
SATA Configuration
» Enable/Disable SATA controller.
» Options available: Enabled, Disabled. Default setting is
Enabled.
•
SATA Mode Selection
» Configures on chip SATA type.
» AHCI Mode: When set to AHCI, the SATA controller enables
its AHCI functionality. Then the RAID function is disabled and
cannot be access the RAID setup utility at boot time.
» RAID Mode: When set to RAID, the SATA controller enables
both its RAID and AHCI functions. You will be allowed to access
the RAID setup utility at boot time.
» Options available: AHCI, RAID. Default setting is AHCI.
•
RAID Device ID
» Choose RAID Device ID.
» Options available: Client, Alternate, Server. Default setting is
Server.
BIOS Setup
- 71 -
(Note)
Advertisement
Table of Contents
