Table of Contents
Advertisement
5-3-4 Memory Configuration
Parameter
Integrated Memory Controller (iMC)
Enforce DDR Memory Frequency POR
Memory Frequency
Get Memory Timing
Outlier Check Mapout
Outlier Threshold Modifier
Memory Topology
Description
When set to Enable, the system enforces Plan Of Record restrictions
for DDR frequency programming.
Options available: POR, Disable. Default setting is POR.
Configures the maximum memory frequency. If Enforce POR is
disabled, user will be able to run at higher frequencies than the
memory support (limited by processor support).
Default setting is Auto.
Auto is the detected SPD value and use it, otherwise use BIOS
Build-in.
Options available: Auto, BIOS Build-in. Default setting is BIOS
Build-in.
Enable/Disable Vendor Specific DIMM Outlier check and mapout.
Options available: Enable, Disable. Default setting is Enable.
Specifies how much to modify the base outlier threshold.
Default setting is 0.
Press [Enter] to view memory topology with DIMM population
information.
BIOS Setup
- 64 -
Advertisement
Table of Contents
