Table of Contents
Advertisement
Parameter
(Note)
This item is configurable when PCIe ACSCTL is set to Enable.
Description
DMA Control Opt-In Flag
Š
– Enable/Disable DMA_CTRL_PLATFORM_OPT_IN_FLAG
in DMAR table in ACPI. Not compatible with Direct Device
Assignment (DDA).
– Options available: Enable, Disable. Default setting is Disable.
Interrupt Remapping
Š
– Enable/Disable the interrupt remapping support function.
– Options available: Auto, Enable, Disable. Default setting is Auto
x2APIC Opt Out
Š
– Options available: Enable, Disable. Default setting is Disable.
Pre-boot DMA Protection
Š
– Options available: Enable, Disable. Default setting is Disable.
SATC Support
Š
– Options available: Enable, Disable. Default setting is Enable.
RHSA Support
Š
– Options available: Enable, Disable. Default setting is Enable.
PCIe ACSCTL
Š
– Options available: Enable, Disable. Default setting is Disable.
Source Validation
(Note)
Š
– Options available: Disabled, Enabled. Default setting is Disabled.
Translation Blocking
Š
– Options available: Disabled, Enabled. Default setting is Disabled.
P2P Request Redirect
Š
– Options available: Disabled, Enabled. Default setting is Enabled.
P2P Completion Redirect
Š
– Options available: Disabled, Enabled. Default setting is Enabled.
Upstream Forwarding Enable
Š
– Options available: Disabled, Enabled. Default setting is Enabled.
BIOS Setup
- 68 -
(Note)
(Note)
(Note)
(Note)
Advertisement
Table of Contents
