Advertisement
MARKING PANEL SP-115
A marking panel SP-115 can be installed on the
luminaire in 3 different locations. This marking
panel is installed perpendicular to the diffusor of
the luminaire, as shown in the pictures below.
The panel is pre-printed and has a plastic
accessory on each side that is used to fasten the
panel to the luminaires.
There are 2 arrow stickers that can be placed in
each side of the marking panel to point to the
desired direction.
Wall or ceiling installation
Wall installation with SP-115
marking panel
SP-115 marking panel
Suspended ceiling installation
with Α-3018 mounting springs
and SP-115 marking panel
Page 3 from 5
Placing the SP-115 marking panel
Place the plastic mounting accessories of the
marking panel as shown in pictures.
Installation methods
Special mounting
suspended ceiling
Suspended ceiling installation
with SP-115 marking panel
A-3018
Mounting springs Α-3018
springs for
installation
Ceiling installation
A-3018
923427000_09_005
Advertisement
