Quick Start; Hardware Preparation - Ebyte E70-DTU User Manual

Hide thumbs Also See for E70-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

E70-DTU(433NW30) User

Manual

electromagnetic compatibility, anti-interference ability;

★ Power reverse connection protection, over-connection protection, antenna surge protection and other multiple

protection functions, greatly increasing the reliability of the radio;

★Powerful software functions, all parameters can be set by programming: such as power, frequency, air rate, address ID,

etc.;

★ Ultra-low power consumption, watchdog current is only 23mA (power saving mode and sleep mode power

consumption is even lower), transmit current ≤ 0.3A;

★ Built-in watchdog, and precise time layout, once an exception occurs, the module will automatically restart, and can

continue to continue to work in accordance with the previous parameter settings.

2. Quick Start

The following hardware devices are required for this test. Before testing, connect the hardware such as power supply and

antenna;

One E70-DTU (433NW30)

One 12V power adapter

USB to RS485 cable or USB to RS232 cable (choose one)

One 433M suction cup antenna

Table of Contents

433nw30