Ebyte E70-DTU User Manual page 16

Chengdu Ebyte Electronic Technology Co.,Ltd.
Manual
AT+ WMCFG =Value
Example:AT+ WMCFG =4
Attention:1. After setting a new mode, reset or power-down restart is required
AT+ TFOCFG Setup/Query Output Transfer Format Configuration (effective on reboot)
AT+ TFOCFG=？
5
AT+ TFOCFG=Value
Example:AT+ TFCFG=0
AT+ TFICFG Setup/Query Input Transmission Format Configuration (effective on reboot)
AT+ TFICFG=？
6
AT+ TFICFG=Value
(This instruction is valid only for the
coordinator)
Example:AT+TFICFG=0
AT+TMCFG Setup/Query Transmission Mode Configuration (reboot effective)
AT+TMCFG=?
7
AT+TMCFG=Value
Example:AT+TMCFG=0
Attention:The coordinator and the node have the same transmission mode to be able to enter the network
properly
AT+ PIDCFG Setting/Querying Device PANID Configuration (effective on reboot)
8
AT+PIDCFG=？
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
WMCFG：4
Parameter Description:
Value: 0~4
0,Coordinator;
1,Normal node.
2,Dormant node;
3,Dormant mode;
4,(factory default), dial code control;
Parameter Description:
Get current output transport format configuration
Response: TFOCFG:0
Parameter Description:
Value: 0~7
0：Output: valid data (pass-through)
1: Output: valid data + long address of sending device
2: Output: valid data + short address of sending device
3: Output: valid data + RSSI
4: Output: valid data + sending device long address + sending device
short address
5: Output: valid data + long address of sending device + RSSI
6：Output: valid data + sending device short address + RSSI
7: Output: valid data + long address of sending device + short
address of sending device + RSSI
Parameter Description:
Get current input transfer format configuration
Response:
TFICFG:0
Parameter Description:
Value: 0~2
0：Input Broadcast
1: Input Receive device short address + data (0x0000 0xffff) for
broadcast address
2：Input Receive device long address + data
Parameter Description:
Gets the current transmission mode configuration
Corresponds:
TMCFG:0
Parameter Description:
Value: 0 or 1
0: Long distance mode, LRM
1: Standard transmission mode, GFSK
Parameter Description:
Get the PANID configuration of the current device
Response:
E70-DTU(433NW30) User
16