Ebyte E70-DTU User Manual page 17

Chengdu Ebyte Electronic Technology Co.,Ltd.
Manual
AT+PIDCFG=Value
Example:AT+PIDCFG=65535
Attention:Nodes can only join networks with the same PANID as them (when configured as 65535 they can join
any network)
AT+ DMCFG Setting/Querying Device Sleep Time Configuration (Effective on Reboot)
AT+DMCFG=？
9
AT+DMCFG=Value
Example:AT+DMCFG=0
AT+RSCFGSetting/querying device automatic reboot parameter configuration (reboot takes effect)
AT+RSCFG=?
10
AT+RSCFG=Value
Example:AT+RSCFG=0
Attention: This parameter can be used for node disconnection detection and is recommended to be turned on.
AT+UBCFG Setting/querying serial port baud rate parameter configuration (effective upon reboot)
AT+UBCFG=?
11
AT+UBCFG=Value
Example:AT+UBCFG=7
AT+UPCFG Setting/Querying Serial Port Check Bit (Effective from reboot)
AT+UPCFG=?
12
AT+UPCFG=Value
Example:AT+UPCFG=0
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
PIDCFG:65535
Parameter Description: Value:0~65535
Parameter Description:
Get current device hibernation time configuration
Response:
DMCFG:0~60
Parameter Description: Configure the wake-up period of the dormant
node
Value: hibernation time, unit second (S). 0~60 S.
（Attention: when configured as 0, the node will never wake up, i.e.,
the node cannot receive data, but can upload data.)
Parameter Description:
Get current device auto-restart parameter configuration
Response:
RSCFG:0
Parameter Description:
Value: 0 or 60~65535 seconds (S)
Less than 60 when the system determines 60, equal to 0, no reboot
Parameter Description:
Get current device serial port baud rate parameter configuration
Response:
UBCFG:7
Parameter Description:
Value:0~7
0：1200
1：2400
2：4800
3：9600
4：19200
5：38400
6：57600
7：115200
Parameter Description:
Get current device serial parity bit parameter configuration
Response:
UPCFG:0
Parameter Description:
Value:0~2
0: no parity
1：Odd parity
2: even parity
E70-DTU(433NW30) User
17