50 Ghz Frequency Operation (8487A And 8487D) - Agilent Technologies 8480 Series Operating And Service Manual

Figure 1-4
NOTE
8485A, 8485A-033, 8485D, 8485D-033 Sensor Accessories

50 GHz Frequency operation (8487A and 8487D)

8480 series sensors that operate up to 50 GHz are fitted with 2.4mm (m) connectors
as standard. To convert the 2.4mm (m) connector for calibration, adapter (2.4mm (f)
to Type-N (m)) is included with the power sensors (shown in Figure 1-5).
The 2.4mm to Type-N adapter is intended for use only at the 1 mW, 50 MHz power
reference of the power meter. Its function as a calibration reference may be
compromised if used for other purposes.
9