Cuisinart Precision Master SMD-50 Series Instruction And Recipe Booklet page 96

CONTENTS
Important Safeguards .................... 2
Unpacking Instructions.................. 3
Parts and Features ........................ 4
Accessories ................................... 5
Operating Instructions ................... 6
Cleaning, Storage
and Maintenance ........................... 7
Tips and Hints ............................... 7
Warranty ........................................ 8
Recipes ........................................ 10
WARNING: RISK OF
FIRE OR ELECTRIC
SHOCK
The lightning flash with
arrowhead symbol within
an equilateral triangle is
intended to alert the user
to the presence of
uninsulated, dangerous
voltage within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of fire or
electric shock to persons.
The exclamation point
within an equilateral triangle
is intended to alert the
user to the presence of
important operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
UNPACKING
INSTRUCTIONS
CAUTION: THE CUTTING CONES
HAVE VERY SHARP EDGES.
To avoid injury when unpacking
the parts, please follow these
instructions.
1. Place the box on a low table or
floor next to the kitchen counter
where you'll use the appliance.
Be sure the box is right side up,
then open the box.
2. Remove the Instruction Book
and the whole set pulp mold.
(The cleaning brush and angled
pusher are in the back of the set
pulp mold.)
Angled
Pusher
3. Place the whole set pulp mold on a
flat surface. Remove the Cleaning
Brush, Angled Pusher and the
upper pulp mold. Then take out
the main body, Straight Pusher,
Cutting Cones, Straight Feed Tube
and Angled Feed Tube, in that
order, from the bottom pulp mold.
Straight
Pusher
Main Body
Straight
Feed Tube
4. Remove the packing materials
and return to the box.
3
Cleaning
Brush
Cutting
Cones
Angled
Feed Tube