Soundoff Signal Mpower PMPSABK004 Manual

2021-2023 DODGE DURANGO POLICE AND CIVILIAN (SXT, SXT PLUS, AND CITADEL MODELS)
FOR USE WITH THE 4X2" QUICK MOUNT MPOWER LIGHT
PMPSABK004 – GRILLE MOUNT BRACKET, 2 MODULE
OVERALL ASSEMBLY SHOWN*

WARNING

•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat build-up and fire. Follow crimp connector
manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle Owner's Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring configuration and proper integration of
system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal or local chassis ground (-) must be
sized to supply at least 125% of max. current and properly fused at power source.
•Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
1
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
1
2 3
NOTICE:
Improper use or installation may void warranty coverage.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N

INTRODUCTION:

mpower® Fascia Light Features:
• 4X2" Quick Mount option available for this bracket design
• Collaboration with Dow Corning® to develop ClearDuty™
optical design
• Greater resistance to gravel pitting, scratching, or cracking
• Improved sealing to prevent water from entering light
• Higher UV and thermal stability to prevent lens from
yellowing over time

CONTENTS

# QTY COMPONENT
1 2 1 MODULE OUTER MOUNT PLATE
2 2 1 MODULE INNER BRACKET
3 4 #6-32 FLANGED LOCK NUT
4 1 INSTALLATION INSTRUCTION SHEET
5 1 PRODUCT WARNING CARD
6 1 CA PROP 65 LABEL
*mpower Sold Separately
PMPSABK004 1122 REV B