PMP2BKUMB4 2020-2021 Ford PI Utility Under Mirror Mount Bracket Kit (each)
For Intersector Surface Mount & mpower
3
1
2
WARNING
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat
build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle
Owner's Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal
or local chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at
power source.
•Install protective grommets when routing wire through firewall or metal.
1.800.338.7337 / www.soundoffsignal.com
1
3" and 4" Stud or Quick Mount
®
4
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
Intersector Surface Mount Light Features:
• Light has separate control functionality and is sync compatible
with nFORCE products
• Available in Dual or Tricolor
• Allows color to be set to flash or steady-burn
• Multiple housing colors available
mpower® Fascia Light Features:
• 3" and 4", Stud Mount and Quick Mount Options available
• Collaboration with Dow Corning® to develop ClearDuty™ optical
design
• Greater resistance to gravel pitting, scratching, or cracking
• Improved sealing to prevent water from entering light
• Higher UV and thermal stability to prevent lens from yellowing
over time
PART#
PMP2BKUMB4
2020 Ford PI Utility
#
NOTICE:
Improper use or installation may void warranty coverage.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
YEAR, MAKE, AND
COMPATIBILITY
MODEL
Surface Mount Intersector
3" or 4" mpower
CONTENTS
QTY
COMPONENT
1
1
90 DEGREE BRACKET INTERSECTOR
2
2
#8 X.50 SM TRUSSHEAD PHILLIPS
3
1
3M DOUBLE SIDED TAPE VHB
4
1
THIN GASKET MATERIAL (6")
5
1
SURFACE PREP WIPE
®
, Stud or Quick Mount
PMP2BKUMB4 0221
PMP2BKUMB1 0619
Need help?
Do you have a question about the mpower Fascia 4 and is the answer not in the manual?
Questions and answers